categories
recent posts
Shunhao moulds factory can make molds: 1. Melamine crockery moulds 2. Urea crockery moulds 3. Glossy melamine moulds 4. Matt finished melamine moulds ...
Shunhao factory has been serving the machines and molds to melamine tableware factories, urea tableware factories, UF toilet seat and cover factories ...
Rice husk tableware Introduction: Rice husk tableware is to regenerate this discarded rice husk into natural, healthy and free of any harmful chemical...
Rationally view the harm of melamine tableware 1) What is melamine tableware Melamine tableware is made from melamine powder (known in the industry as...
Precautions and cleaning of melamine tableware 1. Main ingredients of melamine tableware raw materials: 100% melamine (domestically called A5 material...
The advantages and disadvantages of melamine tableware In daily life, there are many meals used. Tableware is divided into ceramic tableware, bone chi...
The melamine tableware should be placed in a dry place after use." The heated melamine is heated by an infrared heating tube, and the temperature inside the cabinet rises to 200-300 degrees Celsius for disinfection purposes. The electrodes in the infrared heating tube are easily Moisture oxidation. If you drop water into the melamine, various electrical components and metal surfaces are easily damp, and the infrared heating tube will have contact resistance, which will easily burn the valve seat or other parts and shorten the life of the melamine.
Melamine Dinnerware Mold
Melamine is a replacement for ordinary cupboards and avoids the cleaning effect of two contaminated chopsticks. However, although the sealing ability of melamine is relatively good, if the internal infrared tube is not heated for a long time, the humid air in the cabinet cannot be discharged in time, and the mold attached to the tableware will breed and endanger human health. Therefore, do not bring water into the tableware. Melamine is not always energetic, will cause electrical components and wet oxidized metal surfaces, easy to appear in contact with resistance heating tubes, easy to burn seats or other components, shorten melamine Service life.
Tableware Mold
The best melamine is sterilized once in one or two days and disinfected at least once or twice a week. This not only achieves the purpose of disinfection, but also extends its service life. Tableware should be cleaned, drained, and then placed in melamine to reduce disinfection time and reduce power consumption.The selection of tableware materials can not be eliminated, different types of tableware should be disinfected separately. The high temperature resistant tableware is placed in the low temperature sterilization room, and the high temperature sterilization room can be placed in the high temperature sterilization room. In general, high-temperature tableware such as plastics cannot be placed in a lower level of melamine, but should be sterilized in low-temperature melamine to prevent ozone disinfection to avoid damaging the tableware. Some brightly colored plates should not be placed in the melamine dish.
Tableware Mold
Dinnerware Mold
The melamine should be placed in a dry, ventilated place, no less than 30 cm from the wall. It is not necessary to open the door during disinfection to avoid affecting the effect. After disinfection, such as 10 minutes of contact, the effect is better. During the disinfection process, do not open the cabinet door unless necessary, which will not only affect the disinfection effect, but also increase the power consumption. If it is the high-temperature disinfection method of melamine, after the disinfection is finished, the temperature inside the cabinet is still very high, generally after 10 to 20 minutes, the cabinet door can be opened. After each disinfection, the power supply should be turned off in time or the power plug should be unplugged.The melamine should be placed horizontally in a dry and ventilated place with no debris around it and the distance from the wall should not be less than 30cm. The cleaning and maintenance of melamine should be carried out regularly, and the water in the bottom cabinet should be poured out and cleaned. When cleaning and melamine, first remove the power plug and wipe the inner and outer surfaces of the sterilizer with a clean, damp cloth. Do not use water.
prev :
How to calculate the amount of melamine tableware needednext :
Introduction to the principle of melamine tablewareOur machine is Suitable for urea tableware, melamine dinnerware.
Suitable to be used in the molding operation of urea tableware, melamine tableware
Our machine is suitable for all kind of Melamine Dinnerware,plate ,bowl ,tray ,glass ,mug
Our Machine is special in Melamine Crockery ,like bowl ,plate ,tray ,mug ,glass.
500ton Melamine Crockery Molding Machine With Plc Control For Melamine Tableware ,Melamine Crockery
This machins is Suitable for producing double color melamine tableware, toilet seat cover, Bakelite switches, and mahjong.
the professional team to service !